Home > OptimProcess > Printer > Folding

Cross folds

To add a new machine you go to 4 menus:

• characteristics
• quantities
• grammage
• delivery

Characteristics

ou go to the technical characteristics of the machine which breaks down into 6 categories.

General informations

They correspond to administrative informations:

• her name
• is it active in the calculation?
• it is contrary to internal or do you use a subcontractor?

Authorized trim size

Define the authorized trim size by choosing in the drop-down menu.

Open size

It corresponds in going size with 2 fields to fill:

• height ( minimum et maximum) which corresponds to the width of the buckle.
• lenght (minimum et maximum) which corresponds to the depth of the buckle.

These 2 sizes are set in millimeters.

An option is available to determine if the size adjustment in included in the rate folding.

Max. paper weight assuming pre-scoring

The max paper weight are determined depending on the type of sections: 4 to 32 pages.

Makeready

The makeready cost are also determined depending on the type of section: from 4 to 32 pages. You can also find makeready free from a number of copies.

1000 copies

The cost of 1000 copies is also determined depending on the type of section: from 4 to 32 pages.

Quantities

This screen allows you to make a variation of a standard price per 1000 according to quantities( per steps).

Each rule is applicable individually and the system takes into account the most advantageous.

WARNING: If you set :

< à 2000 runs then variations -10%

< à 3000 runs then variations -5%

In this case, for a quantity of 1000, the system will take a variation - 10%.

The rules are put into competition in their field of validity. If both rules are checked, the most advantageous being chosen.

Grammage

Cet écran permet de définir des majorations en fonction de paliers de grammages pour simuler la variation de cadence des machines.

Transport

Cet onglet permet de tarifier, si la machine est en externe ( c'est à dire chez un sous traitant), le coût de transport aller / retour depuis l'imprimeur vers le sous traitant.

Il existe 3 façons de le tarifer:

• avec un coût fixe
• avec un coût proportionnel au kg
• avec un forfait minimum.