Changes between Version 1 and Version 2 of ENOptimProcessMachinesAssemblageBrocheuseDCC

Timestamp:

Jul 31, 2008, 2:44:41 PM (17 years ago)

Author:

Laure L

Comment:

--

ENOptimProcessMachinesAssemblageBrocheuseDCC

@@ -1 @@
-a faire
+[[PageOutline]]
+[wiki:ENWikiStart Home] > [wiki:ENOptimProcess OptimProcess] > [wiki:ENOptimProcessImprimeurs Printer] > [wiki:ENOptimProcessMachinesAssemblage Binding]
+----
+
+
+ = Perfect binder =
+ 
+To add a new sperfect binder, you go to 3 menus:
+
+ * characteristics
+ * rates
+ * quantity
+ * delivery 
+
+ == Characteristics ==
+
+You go to the technical characteristics of the machine which breaks down into 5 categories.
+
+ === General informations ===
+
+They correspond to administrative informations:
+
+ * her name
+ * is it active in the calculation?
+ * is it contrary to internal or do you use a subcontractor?
+
+ === Système de collage PUR ===
+
+Il faut définir quel système de collage utilise la machine. En effet il y a une distinction entre le dos carré collé standard et le dos carré collé PUR (qui apporte un niveau de finition supérieur). 
+Sachant qu'une machine ne peut utiliser les 2. Sil est souhaitable qu'une machine fasse les 2, il faut dupliquer la machine.
+ 
+ === Possible trimmed sizes ===
+
+The sections are previously folded and previously trimmed. You may inform the width and height (minimum and maximum) for different use care :
+ 
+ * portrait binding per 1 or 2 ups
+ * ladnscape binding per 1 or 2 ups.
+
+ === Other technical data ===
+
+ * brochure minimum cut off if the machine has a 3 knives in ouput.
+ * routing on fold (it is necessary for the perfect binders because what used to scrape the interior assembled so the glue can soak backr
+ * number of available stations, cover not included
+ * nombre de postes disponibles, hors couverture (namely that the coverage has systematically his own station).
+ * possibility of limiting the machine to a single run making it impossible to pre-stitching. 
+ * the machine does it 3 knives in output?
+ * a notion of price: une notion tarifaire: folding cost included in the binding cost. This concept is especially useful for the printers taht are referenced in the stitcher treated and why they do not have a detailed rate of the cost of stitching out folding.
+ 
+ === Miscellaneous ===
+
+It is a supplement on the makeready accordinf to various options:
+
+ * supplement makeready cost for 3-knives trimmer
+ * supplement makeready cost for 2 up binding
+ * possibly a free makeready  from a number of copies
+ 
+ === Variation in % the price per 1000 ==
+ 
+Il est possible de définir des variations du prix du 1000 en fonction du format, des dimensions de la présentation et d'options:
+It is possible to define variations in the price of 1000 to match the size, dimensions of the presentation and options:
+ *  A6 size
+ *  A5 size
+ *  A3 size
+ * landscape
+ * 2up binding
+
+ == Rates ==
+
+It is possible to define rates:
+
+ * station by station. For example 1 station to 1 station
+ * by intervals station. For example a same makeready cost and 1000 runs for 1 to 3 stations.
+
+ == Quantity ==
+
+This screen allows you to make a variation of a standard price per 1000 according to quantities( per steps).
+
+Each rule is applicable individually and the system takes into account the most advantageous.
+
+WARNING: If you set :
+
+< à 2000 runs then variations de -10%
+
+< à 3000 runs then variations de -5%
+
+In this case, for a quantity of 1000, the system will take a variation - 10%.
+
+ The rules are put into competition in their field of validity. If both rules are checked, the most advantageous being chosen.
+
+
+ == Delivery ==
+
+This pop up allows you to pricing, if the machine is externally (from a subcontractor), the cost of transport return from the printer to the subcontractor.
+
+There are 3 ways to price:
+
+ * with a fixed cost
+ * with a proportional cost per kg
+ * with a minimum outright cost
+